TOGE TSM BS VS

General type approval + General technical approval Z-21.1.1799
General type approval + General technical approval Z-21.8.1880

Application in cracked and non-cracked concrete
of strength classes from C20/25 to C50/60.

1. Create hole with 35 mm diameter.
2. See 1.
3. Create a 52 mm diameter hole concentric to the 35 mm hole.
4. see 3.
5. Drill a 16 mm hole concentrically to the 35 mm hole.
6. Thoroughly blow out the borehole.
7. Brush the borehole 4x.
8. Thoroughly clean the 16 mm borehole again.
9. Discard three full strokes of composite mortar – then inject composite mortar into 16 mm hole.
10. Screw in the concrete screw until the backfill disc rests on the edges of the 52 borehole.
11. Fill the 35 mm hole over the backfill disc with composite mortar and fill the 52 mm hole with suitable mortar.