Our office hours:Mo - Fr | 07.30 - 16.00Call us:+49 911 659 680
Crash Barriers
Crash barrier anchor
TOGE TSM B
For fastening crash barriers
The TOGE TSM B crash barrier anchor: In combination with injection mortar, it allows high load absorption in cracked and non-cracked concrete. The composite mortar seals the drill hole during processing and thus prevents water penetration. The TOGE TSM B is approved for concrete strength classes from C20/25 to C50/60.
TOGE TSM B Crash Barrier Anchor – At a Glance
Fast and safe installation
The optimized thread enables a quick and safe installation process.
High Loads
High load bearing capacity in cracked and non-cracked concrete.
Frostproof
Borehole sealing by the composite mortar prevents water penetration and frost damage in winter.
Special thread
Load transmission via undercut.
Immediately loadable
Immediately loadable without observing the curing time for the composite mortar.
Headshapes and Materials
Which product is right for you?
Do you need support?
We will be happy to help!
Call us: +49 911 659 68-10
Application examples
Fastening of crash barrier systems
Approvals | Installation instructions | Technical information
Approval
Base Materials
Application in cracked and non-cracked concrete
of strength classes from C20/25 to C50/60.
This is how simple the installation works:
- Drill a hole perpendicular to the concrete surface.
- Thoroughly blow out the borehole.
- Brush the borehole 4x.
- Thoroughly clean the borehole again.
- Discard three full strokes of composite mortar – then inject composite mortar.
- Screw in screws with an impact screwdriver.
- After reaching the screw-in depth, the composite mortar must emerge at the concrete surface.
- Fix the attachment part. The attachment can be mounted immediately – there is no need to observe the curing time of the composite mortar.
